JKT A2 multi tray denesting examples

A2 intelligent and tolerance-compensating tray denesting technology

Nine different trays manufactured by the same tray manufacturer. Manufactured to different designs and by means of different moulds.

Even though the various trays are described as belonging to the same product family, there are numerous variations and differences when individual trays are assessed, measured and compared.

In the data sheet many of the trays have different nominal lengths and widths.
In the data sheet many of the trays have different tolerances in terms of their lengths and widths.
In the data sheet many of the trays have different centricity tolerances.
Several trays exceed the indicated tolerances.
Different tray heights.
Different tray edge heights.
Different stacking distances.
Different foil thicknesses.
Different foil materials, combinations and colours.
Different stacking lug designs.
Non-uniformity in the stacking of trays

Multi bakkedispensering

High speed tray denesting

Three different trays
From three different tray manufacturers
With differences in the trays’ nominal length and width measurements.

Three different trays
From two different tray manufacturers
With large differences in the stacking distance.
From 3.4 to 1.4 mm.
Variations in the trays’ length and width and centricity measurements of up to 3.0 mm.

In addition, the A2 technology denests trays

with provoked stacking errors.

Would you like a more detailed and in-depth explanation of the flexibility of the A2 technology and of how the one and same SPEED-DISP machine is now capable of denesting many different tray variants?